- Products
- Solutions
- About Us
- Blog
- Contact
-
-
-
Simgenet SMG1000 is an IP/MPLS router family running on SMGOS (Simgenet proprietary network operating system), built in a 4U rackmount form factor with dual redundant PSU support and EN 61000-4 Level 3 heavy industrial EMC certification. It offers 100G–200G uplink capacity through Model A and Model B hardware variants.
Simgenet SMG1000 is an industrial-grade IP/MPLS router family running on SMGOS (Simgenet proprietary network operating system) with a Cisco IOS-like CLI-based management interface. It shares the same software architecture and protocol set with all Simgenet MPLS router platforms; model selection depends entirely on hardware capacity, port density, and environmental conditions.
SMG1000 is designed in a 4U rackmount 19" form factor. With dual redundant power supplies (2× 220 VAC), an extended operating temperature range of –20°C to +60°C, and EN 61000-4 Level 3 (heavy industrial) EMC certification, it can be reliably deployed in substations, power plants, railway stations, field cabinets, and all industrial sites outside controlled environments.
Hardware Variants
SMG1000 offers two hardware variants with identical software and protocol capabilities. The only difference is the PCIe slot configuration and maximum supported uplink capacity.
SMG1000 — Model A
• CPU: Intel Xeon ICX 4309Y 2P 8C/2.8G
• Chipset: Intel® C621A
• Memory: 16 GB DDR4-3200 ECC RDIMM (max. 2 TB)
• Storage: Industrial-grade 128 GB PCIe M.2 SSD (wide-temp)
• PCIe Slots: 3× PCIe Gen3 x8 + 4× PCIe Gen4 (incl. 1× x16)
• Onboard LAN: 2× Dual Port 1GbE RJ45 + 1× 1GbE IPMI/iLO
• Max. Uplink: 2× 100G or 1× 200G (via PCIe Gen4 x16 slot)
• PSU: 1× or 2× (redundant) 220 VAC 500W
• Target: Aggregation, ISP edge, mid-scale backbone, energy & railway networks
SMG1000 — Model B
• CPU: Intel Xeon ICX 4309Y 2P 8C/2.8G
• Chipset: Intel® C741
• Memory: 16× DDR5 4400/4800 ECC (expandable)
• Storage: Industrial-grade 128 GB PCIe M.2 SSD (wide-temp)
• PCIe Slots: 3× PCIe Gen5 x8 + 2× PCIe Gen5 x16
• Onboard LAN: 2× Dual Port 1GbE RJ45 + 1× 1GbE IPMI/iLO
• Max. Uplink: 4× 100G or 4× 200G (via 2× PCIe Gen5 x16 slots)
• PSU: 1× or 2× (redundant) 220 VAC 500W
• Target: Core router, high-capacity backbone, heavy traffic & multi-uplink scenarios
Note: Model A and Model B are identical in terms of software and network capabilities.
Operating System & Management
• Operating System: SMGOS — Simgenet proprietary network OS (Linux-based)
• CLI Management: Cisco IOS-like command-line interface
• Web Interface: Browser-based configuration and monitoring
• Remote Access: SSH, SNMP v2/v3, Syslog, RADIUS (AAA)
Routing & MPLS Capabilities
SMGOS supports all industry-standard dynamic routing protocols without licensing:
• Static / PBR / Redistribution
• IPv4 / IPv6 Dual-Stack
• RIPv2
• OSPFv2 / OSPFv3
• IS-IS
• BGP (iBGP / eBGP / Route Reflector / Add-Path)
• MPLS / LDP
• MPLS L3 VPN (RFC 4364)
• MPLS L2 VPN / EoMPLS
• Segment Routing (SR-MPLS)
• MPLS-TE / RSVP-TE
• VRF
• VXLAN
• EVPN
• Fast Convergence / ECMP
• BFD (Bidirectional Forwarding Detection)
Services & Security
• QoS / Traffic Shaping
• DHCP Server / Relay
• NAT (SNAT / DNAT / PAT / VRF-aware)
• IPsec VPN (Site-to-Site)
• OpenVPN
• PPPoE Server
• IEEE 1588 PTP v2
• NTP / SNTP
• SNMP v2/v3
• RADIUS (AAA)
• Syslog
Expansion Cards & Interfaces
SMG1000 can be expanded with project-specific interface cards via PCIe slots:
• 1G SFP cards (4-port / 8-port)
• 1G RJ45 cards (4-port / 8-port, Bypass supported)
• 10G SFP+ cards (2-port / 4-port)
• 40G QSFP+ cards (2-port)
• 100G QSFP28 cards (2-port)
• 200G QSFP56 cards (ConnectX-6 DX)
• E1 G.703 cards (2/4/8/16 port)
• RS-232/422/485 serial cards (4/8/16 port)
Ethernet cards operate on Intel and NVIDIA (Mellanox) chipsets with TCP/IP offloading, RDMA (RoCE), SR-IOV, and DPDK support for low latency and high throughput.
Fiber SFP modules support distances of 10–120 km; with optical boosters (EDFA), reach can be extended up to 400 km.
Environmental Resilience & Certifications
• Operating Temperature: –20°C ~ +60°C
• EMC: EN 61000-4 Level 3 (heavy industrial), EN 55032/35
• Safety: CE (LVD 2014/35/EU + EMC 2014/30/EU), IEC 62368-1
• Domestic Product Certificate: 95.13% local content (TOBB certified)
• Test Laboratory: ELDAŞ (TÜRKAK accredited)
Application Areas
• Energy transmission & distribution networks (substations, power plant communications)
• Railway & rail system communications
• Telecom operator backbone & aggregation
• ISP infrastructure
• Data center interconnect
• Industrial facility communications
• Campus & enterprise WAN backbone
Interoperability
Simgenet IP/MPLS routers can seamlessly operate point-to-point or point-to-multipoint with equipment from Cisco, Huawei, Juniper, Nokia, and other vendors through standard routing protocols (BGP, OSPF, IS-IS, MPLS/LDP).
Simgenet IP/MPLS Router Family — Comparison Table
All models run on SMGOS (Simgenet proprietary network operating system) | Cisco IOS-like CLI-based management
|
|
SMG411 |
SMG104 |
SMG818V5 |
SMG1000 |
|
HARDWARE PLATFORM |
||||
|
Operating System |
SMGOS |
SMGOS |
SMGOS |
SMGOS |
|
Chipset / Platform |
Intel |
Intel C236 |
Intel® C741 |
ICX 4309Y 2P 8C/2.8G |
|
CPU |
Intel |
Intel Xeon E3-1200 v5 |
Xeon 5418Y |
Xeon ICX 4309Y 2P 8C |
|
Memory (RAM) |
16 GB |
Max. 64 GB DDR4 |
16x DDR5 4400/4800 ECC |
16x DDR5 4400/4800 ECC |
|
Form Factor |
1U Rackmount 19" |
1U Rackmount 19" |
2U Rackmount 19" |
4U Rackmount 19" |
|
Dimensions |
N/A |
430 x 550 x 89 mm |
440 × 592 × 88 mm |
N/A |
|
Power Supply |
220 VAC, 250W |
220 VAC, 250W |
2x 220 VAC, 250W |
2x 220 VAC, 250W |
|
Operating Temperature |
-5°C ~ +50°C |
-5°C ~ +50°C |
-20°C ~ +60°C |
-20°C ~ +60°C |
|
EMC Certification |
EN61000-4 Level 1 |
CE, RoHS, EN61000-4 L1 |
EN61000-4 Level 3 |
EN61000-4 Level 3 |
|
EXPANSION & PORTS |
||||
|
PCIe Slot |
PCIe-based |
4x PCIe Gen3 x8 |
8x PCIe Gen5 x8 |
Model A: 1x / Model B: 2x PCIe Gen4 |
|
Max. Uplink Speed |
1G / 10G |
1G / 10G / 40G / 100G |
1G / 10G / 40G / 100G |
100G / 200G |
|
Max. Uplink Capacity |
PCIe Gen3 bandwidth |
PCIe Gen3 bandwidth |
PCIe Gen5 bandwidth |
Model A: 2x100G Model B: 4x100G/200G |
|
1G SFP Card |
1/10G |
4-port / 8-port SFP |
8x 8-port SFP |
7x 8-port SFP |
|
1G RJ45 Card |
6 |
4-port / 8-port (Std & Bypass) |
8x 8-port RJ45 |
7x 8-port RJ45 |
|
10G SFP+ Card |
4 |
4x 2x SFP+ |
8x 2x SFP+ |
7x 2x SFP+ |
|
40G QSFP+ Card |
— |
4x 2x QSFP+ |
8x 2x QSFP+ |
7x 2x QSFP+ |
|
100G QSFP+ Card |
— |
4x 2x QSFP+ |
8x 2x QSFP+ |
2x 2x QSFP+ |
|
ROUTING & MPLS |
||||
|
Static / PBR / Redistribution |
✓ |
✓ |
✓ |
✓ |
|
IPv4 / IPv6 Dual-Stack |
✓ |
✓ |
✓ |
✓ |
|
RIPv2 |
✓ |
✓ |
✓ |
✓ |
|
OSPFv2 / OSPFv3 |
✓ |
✓ |
✓ |
✓ |
|
IS-IS |
✓ |
✓ |
✓ |
✓ |
|
BGP (iBGP / eBGP / RR) |
✓ |
✓ |
✓ |
✓ |
|
BGP Add-Path |
✓ |
✓ |
✓ |
✓ |
|
MPLS / LDP |
✓ |
✓ |
✓ |
✓ |
|
MPLS L3 VPN (RFC 4364) |
✓ |
✓ |
✓ |
✓ |
|
MPLS L2 VPN / EoMPLS |
✓ |
✓ |
✓ |
✓ |
|
Segment Routing (SR-MPLS) |
✓ |
✓ |
✓ |
✓ |
|
MPLS-TE / RSVP-TE |
✓ |
✓ |
✓ |
✓ |
|
VRF |
✓ |
✓ |
✓ |
✓ |
|
VXLAN |
✓ |
✓ |
✓ |
✓ |
|
Fast Convergence / ECMP |
✓ |
✓ |
✓ |
✓ |
|
BFD |
✓ |
✓ |
✓ |
✓ |
|
SERVICES & SECURITY |
||||
|
QoS / Traffic Shaping |
✓ |
✓ |
✓ |
✓ |
|
DHCP Server / Relay |
✓ |
✓ |
✓ |
✓ |
|
NAT (SNAT/DNAT/PAT/VRF-aware) |
✓ |
✓ |
✓ |
✓ |
|
IPsec VPN (Site-to-Site) |
✓ |
✓ |
✓ |
✓ |
|
OpenVPN |
✓ |
✓ |
✓ |
✓ |
|
PPPoE |
✓ |
✓ |
✓ |
✓ |
|
IEEE 1588 PTP v2 |
✓ |
✓ |
✓ |
✓ |
|
NTP / SNTP |
✓ |
✓ |
✓ |
✓ |
|
SNMP v2/v3 |
✓ |
✓ |
✓ |
✓ |
|
RADIUS (AAA) |
✓ |
✓ |
✓ |
✓ |
|
Syslog |
✓ |
✓ |
✓ |
✓ |
Which Model Should You Choose?
All models run the same SMGOS software and support the same protocol set. Model selection should be based on environmental resilience requirements, port/uplink capacity, and physical space — not software capabilities.
Criterion 1: Environmental Conditions
|
|
SMG411 / SMG104 |
SMG818V5 / SMG1000 |
|
Environment |
Controlled room, data center, climate-controlled cabinet |
Substation, field cabinet, outdoor site, railway station |
|
Temperature |
-5°C ~ +50°C |
-20°C ~ +60°C |
|
EMC Level |
EN 61000-4 Level 1 |
EN 61000-4 Level 3 |
|
Conclusion |
Sufficient for office / DC environments |
Required for harsh field conditions |
Criterion 2: Port Density & Uplink Capacity
|
|
SMG411 |
SMG104 |
SMG818V5 |
SMG1000 |
|
PCIe Slot |
Limited |
4x Gen3 |
8x (Gen5) |
5x Gen4 or 2x Gen5 |
|
Max. Speed |
10G |
100G |
100G |
200G |
|
Suitable Scenario |
Few ports, low bandwidth |
Medium-high ports, multiple uplinks |
High port density, multiple cards |
High port density, multiple cards |
Criterion 3: Physical Space & Form Factor
|
|
SMG411 |
SMG104 |
SMG818V5 |
SMG1000 |
|
Form Factor |
1U Rackmount |
1U Rackmount |
2U Rackmount |
4U Rackmount |
|
Note |
Narrow cabinet, limited space |
Standard rack |
More card capacity |
More card capacity |
Notes:
• All models use the same SMGOS software — protocol and service capabilities are identical across all platforms.
• Any model can be deployed in any sector (energy, railway, telecom, DC). Selection depends on port requirements, environmental conditions, and physical space — not on the sector.
• SMG818V5 and SMG1000: EN 61000-4 Level 3 (heavy industrial EMC), -20°C ~ +60°C, dual PSU — recommended for all field deployments outside controlled environments (energy, railway, industrial facilities, etc.).
• N/A: Information not yet published in the datasheet.